VI–67: Best Practices for Building a Bridge to Unlock the Power of Vision APIs

Share This Post

This is a transcript of my VI–67 session at 2017’s Deltek Insight


  • Introduction
  • Connecting to the Vision API Web Service
  • Available Methods and Schemas
  • Reading Data from Vision
  • Writing Data to Vision
  • Parsing XML Data
  • Where to take it from here
  • Tips & Tricks


What is the Vision API (Vision XTEND)

  • It’s a Web Service
  • Available on premise and in the cloud
  • Installed by default
  • Allows you to read from and write to any Info Center record (including User Defined Info Centers)
  • Allows you to create and post journals, timesheet, expenses, etc…
  • Applies Vision’s security model and business logic
  • No direct access to the database necessary

What do we cover in this session?

  • We will create a simple MVC web page that can display and modify project names
  • Due to time and presentation limitations we cannot go directly into Visual Studio. All code examples are screenshots
  • If you want to review the code on your laptops download it from GitHub ( in the VI67 folder)
  • These are just concepts. The code does not include error handling or any security considerations

Connecting to the Vision API web service

Access from browser

  • The “Deltek Vision Open API Web Service” can be accessed through a standard browser
  • Will show a list of available methods
  • Standard location: http://<your vision application location>/visionWS.asmx

Use the web service in Visual Studio

  • Open Visual Studio and create a project ( MVC Solution)
  • In the Solution Explorer, right-click the References item and select Add Service Reference…
  • In the Address enter your location of the asmx file and click GO (sample: http://localhost/vision/visionWS.asmx)
  • In the Services list, open DeltekVisionOpenAPIWebService and select DeltekVisionOpenAPIWebServiceSoap
  • Give it a specific Namespace (VisionAPI)
  • Visual Studio will generate classes for you to interact with the Vision API

Test Connection

  • Add a folder called Services to your project and add a class called VisionServices to that folder
  • Add the code from the screenshot
  • Add a unit test project to your solution and add your MVC app as a reference
  • Add a New Item…Application Configuration File to the unit test project
  • Open the web.config file in your MVC app and copy the complete <system.serviceModel> block into your new app.config file in your unit test
  • Add the unit test code from the screenshot
  • Build and debug your Test Method

Connection Information

The web service will always ask for a connection info. This is an XML string in the following format:

        <databaseDescription>Weblink Database Name</databaseDescription>
        <userName>Vision User Name</userName>
        <userPassword>Vision User Password</userPassword>  </VisionConnInfo>

Once a connection has been established and a method returned a session ID to the program you can use that session id for subsequent calls:

        <SessionID>Session ID returned by the previous call</SessionID>

Test connection

  • Create GetSystemInfo code
  • Add Unit Test project
  • Add a reference to the main project
  • Copy <system.serviceModel> from web.config of main app to app.config of unit test app
  • Add unit test code
  • Debug and check result

Available methods and schemas

Method and schema information

You can find a list of available methods

  • in the PDF documentation “DeltekVisionXtend76WebServicesAPI.pdf”
  • in the list displayed by the browser if you go to http:///vision/vision WS.asmx
  • in the Visual Studio Object Browser when you go to your new Namespace “VisionAPI”

The schema definitions for the API can be found on your application server: C:\Program Files (x86)\Deltek\Vision\Web\xsd

  • Each info center has a corresponding …_Schema.xsd file that can be opened in Visual Studio and checked for specific elements

Specific vs. generic methods

You can always choose specific read/write methods vs generic methods. With the generic methods you will have to pass the InfoCenter information but these give you more control over the returned data. We suggest to use the generic methods by default

Writing Data

  • SendDataToDeltekVision (generic): can insert or update all info centers
  • SendDataToDeltekVisionWithReturn (generic): This method provides the same functionality as SendDataToDeltekVision but also returns snapshots of the records after the updates
  • [InfoCenter] (specific): adds a record to the specific info center
  • Update[InfoCenter] (specific): updates a record in an info center

Deleting Data

  • DeleteRecords (generic): This deletes records from Info Centers.
  • Delete[InfoCenter] (specific): deletes a record from an Info Center

Reading Data

  • GetRecordsByKey (generic): retrieves records by a primary key
  • GetRecordsByQuery (generic): retrieves records based on a SQL select statement
  • Get[InfoCenter]ByKey (specific): retrieves records by key
  • Get[InfoCenter]ByQuery (specific): retrieves records by query

Specific vs. generic methods for UDICs

Deleting Data

  • DeleteUDIC (generic): This deletes records from a UDIC.

Reading Data

  • GetUDICByKey (generic): retrieves UDIC records by a primary key
  • GetUDICByQuery (generic): retrieves UDIC records using a query

Reading data from Vision

Sample “MVCApp_Phase2”

  • This is an extension to the MVC application we started with.
  • It adds project read functions to the VisionServices class and a project controller and views that display a list of recent projects (including detail views)
  • It also adds 2 models (ProjectInfo and ConnectionInfo) and also moves the connection info into the application’s settings so it is easier to manage
  • The following screenshots will guide you through the code for this

Models: ProjectInfo and ConnectionInfo

  • The ProjectInfo class is used to store and display limited project data
  • The ConnectionInfo class is used to load the connection details from the app settings and pass it into the service class

VisionServices: GetProjectByQuery

  • Sets the connection info
  • Calls the GetProjectsByQuery with a statement that must include select * from PR
  • Reads the returned XML document and creates a list of project info items from it

VisionServices: GetProjectByID

  • Similar to the ByQuery call but this uses one specific primary key to retrieve the data
  • Because the project table has a primary key with 3 fields, the key values must be passed accordingly
  • It will only look for the top level project


  • Initializes the VisionServices class with the connection info from the app settings
  • Retrieves a list of the 50 newest regular projects in the database
  • Includes a function to retrieve a detail record by id (when clicked in the web form)

Writing data to Vision

Sample “MVCApp_Phase3”

  • This is an extension to MVCApp_Phase2.
  • It adds the SubLevel field to the project info class and returns it in the read functions. This is necessary because it is a required value for inserts and updates to projects
  • It adds the function SaveProjectInfo to the VisionServices class that creates an XDocument on the fly and passes it to the UpdateProject method of the API
  • The following screenshots will guide you through the code for this

ProjectsController: Edit methods

  • Adds a GET and a POST method for the Edit screen
  • Automatically creates the necessary Views
  • Does not include any error handling

Parsing XML data

How to read XML data

  • Sample is using Linq for XML (XDocument/XElement)
  • Create XDocument from returned XML string:
    • Dim xmldata As String = _service.GetRecordsByQuery(…)
    • Dim _myXDocument As XDocument = XDocument.Load(New System.IO.StringReader(xmldata))
  • Query child nodes with .Element(s) and .Attribute(s)
  • Traverse down a complete XML graph by combining multiple elements:
    • .Element(“RECS”): returns first child of previous XML level RECS
    • .Element(“RECS”).Elements(“REC”).Elements(“PR”).Elements(“ROW”): returns all ROW elements in all PR elements of all REC elements in the first RECS node

How to write XML data

  • LINQ for XML allows you to write XML expression in your source code
  • Using <%= … %> allows you to insert any value into the XML expression
  • You can write elements and attributes without having to concatenate strings
  • Only works in

Where to take it from here

  • Integrate a “carousel” into your web presence that displays certain projects directly from the Vision database
  • Create a “Project Initialization” web application that allows you to add additional checks and information for your teams
  • Create a dynamic “Contact Us” page in your web presence that reads from the Vision employee hub
  • Create a “Self-Service” app for your clients and vendors displaying project and even billing information

Tips, Tricks & Resources

Tips & Tricks

  • Create a specific user in Vision for API access only and make sure the user has the correct access rights
  • Turning on https can be tricky
  • Always (!!!) follow the sequence of fields in the schema when you create data records
  • If the generic method will not work no matter what you do, try the specific method for that call
  • Be careful with returning ALL data. You might run into issues where the returned message is too big. Increase maxReceivedMessageSize and maxStringContentLength in your App.Config

Vision API Test Bench

  • This is a free service located at:
  • Allows you to try to connect to your service, check connectivity and simple reads from info centers and UDICs and shows you code samples for and SOAP UI (for testing purposes)
  • Writing and Stored Procedure Calls are currently turned off (security reasons) but you will still be able to check the code samples

Links and Downloads

All demos use the VisionDemo76 database which can be downloaded from the Deltek Support Site

More To Explore

Planning Your Projects

This is an ongoing series in collaboration with Rhodium Digital where we present a number of different topics in regards to the latest Deltek Vantagepoint